Abnormal waveform Medical simulator , ECG signal simulator PLG-2000SUP

PLG-2000SUP Abnormal waveform ECG signal simulator PVC,VPC, ECG signal generator, Arrhythmia ECG simulator


Introduction:

This model simulator suitable for ECG machine manufacturer, or ECG kind product manufacturer. It can be used to adjust machine, and use for ECG machine development.

Feature:

Rechargeable Lithium battery
10 pcs multi-functional ECG connector, can be connect with different type ECG machine cable or patient monitor cable
Battery power indicate light
Low battery power automatic turn off function, protect the Lithium battery

Description

The waveform type description ( using the Mindray PM8000 monitor detection )
1, waveform code 1: normal ECG waveform
The data code at 60 is mean :heart rate 60 bpm
The frequency range is 10-200 BPM and wave amplitude is fixed, it will not be affected by the amplitude setting.
2, waveform code 2: It is represent triangular waveform waveform code
Data code at 75 : it is mean heart rate 75bpm
Frequency range: 10-400bpm
Amplitude range: 0.1-4mV, the amplitude can be regulated in regulate setting place
3, waveform code 3: Square waveform
Data code at 10 : it is mean 1Hz
Frequency range: 0.1-10Hz
Amplitude range: 0.1-4mV, the amplitude can be regulated in regulate setting place
4, Waveform code 4 :Sinusoidal waveform
Data code at 10 : it is mean 10Hz
Frequency range : 1-100Hz
Amplitude range: 0.1-4mV, the amplitude can be regulated in regulate setting place
5, Waveform code 5: QRS wave waveform
You can change the amplitude of T wave, QRS wave amplitude, width of QRS wave, QRS wave frequency
To change these parameters through the combination of keys
6.Waveform code at 6: Respiratory waveform
Data code at 30: it is mean 30bpm
Respiratory waveform frequency adjustment range 10-120 times
7, Waveform code 7: pacing signal ,the pacing pulse signal of positive and negative direction
Data code at 20 ( It is represent 2mS )
The frequency is 60bpm
Amplitude range: 0.1-4mV, the amplitude can be regulated in regulate setting place
Through the combination of keys to switch the positive and negative direction
You can change the pulse width, the range is 0.5-2mS
8, Waveform code 8: QRS wave of front pacing signals
Front pacing signal is positive and negative pulse waveform, through the combination of keys to switch
The width of pacing signal pulse can be adjusted, the range is 0.5-2mS
Amplitude range: 0.1-4mV, the amplitude can be regulated in regulate setting place
9, Waveform code 9: adjust the waveform amplitude
Data code at100 : it is represent 1Mv
400: it is represent 4Mv
10, waveform code at A:

11, Waveform code at B:

12, waveform code at C:

13, waveform code at D: